25
3-2. Operating the Tug
1. Before turning on the tugs, make sure the tracks and bottom of the tugs are free
from obstruction.
2. Turn the tugs on using the ON/OFF switch. There will be a short series of beeps and
then the ON/OFF switch will illuminate red to show the tug is on. The ON/OFF switch
light will be on solid when the battery is fully charged. When the battery is low the
ON/OFF switch light will blink and there will also be a beeping sound.
ON/OFF Switch
3. Turn on the power switch on the radio controller. The power indicator LED will
illuminate green/blue in color.
It is recommended that you practice maneuvering the tug prior to loading the plane.
It is recommended that you practice maneuvering the tug prior to loading the plane.
5. When towing your helicopter ALWAYS be cautious of your surroundings in reagrds to both
the main rotor blades and tail rotor. Do not make any fast turns with the tug.
4. It is recommended to use the radio in fast speed mode. Moderate and Slow speed
mode should be used when manuvering in tight quarters as it reduces the tugs power
output.
