13
2-1 Front Assembly
T-Handle Pin
T1H2 Short Adjuster Right End
T1H2 Short Adjuster Left End
(2X) 3/8”-16 Shoulder Blot
Right Tug
Left Tug
Measured Helicopter Skid Center to Center Distacne
(1)
(2)
(4)
(3)
Center Numbered Tube Insert
End Numbered Tube Insert
(5)
Center Tube
(6)
Adj. Handle
*NOTE*
BEFORE STARTING ASSEMBLY PROCESS PLACE BOTH RIGHT AND LEFT
TUGS APART ABOUT 5 INCHES LESS THAN THE SKID WIDTH MEASURED
EARLIER. IT IS POSSIBLE BOTH TUGS CANNOT BE PLACED 5 INCHES LESS
WITHOUT INTERFERRING AND IN THIS CASE THE TUG WIDTH WILL BE AT ITS
MOST MINIMUM.
Assembly Figure 1
2. Tug Assembly
