22
Step 4: Align the center tube and the end numbered tube insert so they are
concentric with one another. Insert the T-Handle pin into the number previ-
ously recorded from the T1H2 short Adjuster end and connect both the cen-
ter tube and end numbered tube together.
Center Tube
End Numbered Tube
T-Handle Pin
Number will vary and should be the
same as the T1H2 Front Adjuster End
Adjust to number on front
T1H2 Short Adjuster Mid-Section
Step 5: Insert the T1H2 Long Adjuster End Numbered tube into T1H2 Roller
Long Block and align the two threaded holes with the thru holes on the Left
Back-end assembly. Screw in (2X) 1/4”-20 Socket Head to secure the Long
Adjuster assembly to the Left Back-end Assembly.
T1H2 Left Back-end Assembly
(2X) 1/4”-20 Socket Head
Part # 95304
Fully Assembled T1H2 Back-end
