Abus WIRELESS ALARM SYSTEM, Руководство по установке

Страница: 47 / 101

7-47
22 22 55
Zone Sound
Under Zone sound , you can, for each zone, define the alarm signal individually
that is triggered when the alarm system is active.
1. Under Parameters , press
55
to access the Zone sound menu option. You see
the following on the display:
2. Enter a two-digit number and press .
3. Select and configure a zone signal for each zone.
Zone sound
Quick-Key Parameters Default Range
22 22 55 ZZ ZZ
+
11
Silent
No audible alarm is generated. An alarm is transmitted by telephone only.
22 22 55 ZZ ZZ
+
22
Bell Only
Activates the external and internal sounders for the defined sounder duration or until
a valid user code is entered and the key is pressed.
22 22 55 ZZ ZZ
+
33
Buzzer Only
Activates the piezo buzzer of the alarm system.
22 22 55 ZZ ZZ
+
44
Bell + Buzzer Default for all
zones
Activates the piezo buzzer plus the internal and external sounders. The sounders
switch off when the programmed sounder duration expires.
22 22 55 ZZ ZZ
+
55
Door Chime
If the system is inactive, this causes the piezo buzzer of the alarm system to emit 3
short beeps. If the system is active, the internal and external sounders are activated.
22 22 55 ZZ ZZ
+
66
(Bell/A Buzzer/D)
If the system is inactive, this activates the piezo buzzer of the alarm system, and if the
system is active, the internal and external sounders are activated.