Abus IPCA54581B, Руководство пользователя

Страница: 128 / 282

128
Linkage method
Set here which action is to take place in the event of an event.
Normal linkage
Send e-mail: You will receive an e-mail as notification, activate the checkbox for this.
Notify monitoring centre:The
ABUS CMS software can be informed when an event is
triggered. This can be followed, for example, by an image pop-
up.
Trigger recording
Activate to record to SD card via motion detection.
8.6.7 Dynamic fire source detection
This function is only available in the thermal image channel.
Only the following function is available in this camera type:
1. Smoker detection (smoke mode)
The function detects
Activate the dynamic fire detection. Smoke mode is now available as a function selection. The function
detects burning cigarettes or cigars in the observed scene of the thermal image channel.
Show fire source data in the stream:
A detected fire source is marked with a red rectangle in the video
stream.
Sensitivity: Setting of the sensitivity. The higher the value, the earlier a point
source of heat is detected as a source of fire.
Alarm interval: Waiting time until the next fire source detection is carried out