Abus HDCC90001, Руководство пользователя

Страница: 90 / 93

Setting: System
23
Setting: System
General information on system
General system information can be displayed in this
menu, and firmware updates can be carried out.
The system management also contains the camera and
user management.
System settings
Basic information
Parameter Description
Device name
Change the device name here.
No.
Change the device ID here.
This ID is used for control via the
TVAC26000 keypad.
Further
information Display the model IDs and firmware
versions.
Time settings
Parameter Description
Time zone
Select the time zone in which the
recorder is installed here. The time is
changed by the GMT zone based on
your selection.
NTP Time synchronisation via the network
using the NTP server.
Important: The NTP time does not
recognise time zones, so the time
zone must be adjusted every time.
Server address URL/host name of the NTP server
NTP port Service port of the NTP server
Interval Update interval for time
synchronisation.
Manual time
synchronisation Manual time setting
Device time Current time set on the recorder
Set time Enter the desired time manually here.
Synchronisation
with computer
time Synchronise the time with your
PC time (set time of the operation
system).
DST Activate DST (Daylight Saving
Time). DST is required for
programming the summer/winter
time setting. The setting is the same
for all regions within Europe.
Start time Enter the start time.
Europe: last Sunday of March at
02:00
End time Enter the end time.
Europe: last Sunday of October at
03:00