Abus HDCC90001, Руководство пользователя

Страница: 61 / 93

Maintenance
61
Update
Note
A device can be upgraded from a USB medium
or via the network via FTP.

Copy the upgrade file with the *.mav file
extension onto the main directory of a
USB stick.

Insert the USB stick into one of the device's
USB ports.
1. Select the USB port, clicking on Refresh,
if necessary.
2. Select the update file and click on Update.
3. Wait until the device reboots.
4. If necessary, check the firmware status under
Information in the Maintenance menu. Performing a
system reset.
Note
Upgrades via FTP are carried out in the same way
as detailed above.

The PC must be on the same local network.

Set up a PC as an FTP server.

Enter the IP address of the FTP server .
Standard
Note
This process involves the device being reset to
the default factory settings.
Warning
All settings adjusted since the device was started
up will be deleted (cameras, recording settings,
PTZ, alarms etc.)
Avoid loss of data by saving the settings
beforehand. It can be re-imported once the
system has been reset.
Net Detect
Information regarding the network traffic and network
interfaces is shown here.
Traffic tab
The network graphs can be used to measure continuous
traffic on the recorder. The amount of data sent and
received is shown in graph form.
Depending on the network settings, the status and
information for one or two network connections is shown
in the field underneath the graph.
Note
This view allows for the analysis of network and
performance problems with the recorder.