Abus HDCC90001, Руководство пользователя

Страница: 10 / 93

External I/O connections and wiring
10
External I/O connections and wiring
General
The ABUS embedded recorders are equipped with
external interfaces for the control of alarm contacts, PTZ
cameras, keyboards and audio devices. The structure
level of the connections depends on the recorder model.
The larger the structure level of the recorder, the more
connections are normally present on the device.
Note
In your recorder’s quickstart manual or at
http://www.abus.com , you will find an exact listing
of the external interfaces in the technical data.
Audio connections/2-way audio
The audio connections on the recorder are only used for
remote 2-way audio communication via a network
connection. This can take place via the web interface on
the recorder, via the ABUS CMS software or via the iDVR
Plus app. The system configuration for this purpose is as
follows:
Note
If the 2-way audio communication takes place via
a PC, you must ensure that a microphone and
loudspeaker are connected. In order to use the
web browser function, the ABUS recorder plug-in
must be installed.
Connection Description
RCA audio input for the connection
of a separate microphone for
2-way audio communication.
If the volume is too low, use an
additional preamplifier to raise the
signal levels of the microphone
input.
RCA audio output for the
connection of a separate
loudspeaker for 2-way audio
communication. Passive
loudspeakers must be connected
via a locked amplifier.
Network
Audio OUT
Audio IN
Line OUT
Mic IN