28
corresponding wireless operating panel. You can now redefine the
functions of buttons 1 and 4. You have the following options (as of software
version 2.xx.yy):
•
Full Set
•
Part Set
•
Unset
•
Output z (on, off)
As of software version 3.xx.yy:
•
Full Set
•
Part Set
•
Unset
•
Output z (on, off, toggle or pulse)
Now continue installation from item 12 in chapter 7.
9. Operation
Arming
To arm your secvest. 868 wireless alarm system, turn the key to the left as
far as possible. The lock activates the right button (12).
A short flashing of the right, red LED (14) shows you that the wireless key
switch has sent the information to the system and that the battery has
sufficient capacity. If the LED does not light up (during battery operation),
check the state of the battery.
Following expiry of the exit delay, the wireless alarm system is activated
and sends the information that it is armed to the wireless key switch. The
wireless key switch signals this by lighting up the right, red LED (14) for ca.
12s.
Disarming
To disarm your secvest. 868 wireless alarm system, turn the key to the
right as far as possible. The lock activates the left button (11).
A short flashing of the left, green LED (13) shows you that the wireless key
switch has sent the information to the system and that the battery has
sufficient capacity. If the LED does not light up (during battery operation),
check the state of the battery. Following disarming, the secvest. 868
wireless alarm system sends the information that it is disarmed to the
