24
Press the program button (15) repeatedly to access the desired submenu.
Program mode is exited at all menu levels after about 2 seconds if the
program button (15) is not pressed.
Activate submenus or learn mode by pressing the program button (15) and
keeping it pressed. This is confirmed by the display of a .
In its condition at delivery, the wireless key switch is programmed so
that all 4 partitions can be switched and the installer pin “1234” is
transmitted.
8.1. User code
If you press the program button (15) once, you see th following on the
display: . Keep the button pressed until the appears on the display.
When you program the user code, the first position is shown by a and
after about 1 second, the current programming is displayed (e.g.: ). You
can now change this number by pressing the button. Each position of the
user code can have a value from 0 to 9 (
). When the desired value is reached, press the button and keep it
pressed until
appears on the display. If you release the button, the
second position is shown with
and you can continue input.
The 3rd position is shown with
, and the 4th with
.
Program all 4 digits of the user code in this way.
8.2. Partitions
To access the Partition mode, press the program button (15) twice. The
display shows
. Keep the button pressed until the appears on the
display.
When you program the first partition, the first position is shown by a
and
after about 1 second, the current programming is displayed (e.g.: ). You
