34
12. Additional information
12.1 Troubleshooting
Malfunction
Troubleshooting
I pulled the activation
– the undamped explosion
handle without the cartridge
pressure will damage the
or with an empty cartridge-
system and render it unuse-
able and must be repaired
– Direct all queries to your
respective service center
Activation handle does
– Put a drop of ABS oil into
not attach
the coupler. Push up coupler,
attach and remove handle
several times until the coupler
is functioning properly
– If this doesn’t work the
system has to be sent to your
respective service center
– Do not try to attach the
handle with force
– If you are out in the field and
you have no ABS oil with you,
push the coupler up, attach
the handle and then push the
coupler down
Malfunction
Troubleshooting
The charged activation
– You must leave the full
handle does not come off
cartridge in place
– Gently push the coupler
upwards, wiggle the handle
from side to side and carefully
try pulling it down
– In addition apply a drop of
ABS oil to the handle and
turn it to increase lubrication
– If this doesn’t work the system
has to be sent in for service
The airbags are difficult
– Were the airbags folded
to remove from the
properly?
compartments and are
– Did the weight of the cartridge
hard to inflate
match the filled weight?
– If you answered both with yes
you have to send the airbag in
for service
– If you are unsure about either
one of these points, perform a
practice activation
– If the problem persists send
the ABS-System in for service
English
