ABNOX AXDV-R1 Series, Инструкция по сборке

Страница: 28 / 46

EN
28
Safety instructions
Read this operating manual carefully to familiarise yourself with the safe and efficient
operation of the product. Retain this manual as a reference. This operating manual
contains important provisions and information for the safe and proper operation of the
product. It is also intended to help operating and maintenance personnel to minimise
hazards, repair costs and downtime, and to improve the reliability and service life of
the product. It is therefore important to ensure access to this document at all times
for any person assigned to the care of the product.
Proper use
The product may be used only under the intended operating conditions. Any other or
further use constitutes improper use. The manufacturer is not liable for damages due
to improper use. Proper use also includes:

Observing and complying with all notices and warnings in this operating
manual.

Performing all inspection and maintenance work.
Obligations of the operating company
The person responsible for the safety of the product has to ensure that:

Only qualified personnel is assigned to work on the product

The operating manual is always available to said personnel during all work,
and the personnel is obliged to consistently follow it

The accident prevention rules and regulations applicable for the place of use
are observed, and the prescribed maintenance and repair work is carried out
Basic safety information
The following must be observed for the safe handling and trouble-free operation of
this product:

Using the product for other than its intended use is prohibited.

No changes may be made to the product.

A safe operating state has to be maintained at all times. We provide device
training on request to impart the necessary state of knowledge to your
personnel.

Disconnect the product from all energy sources prior to any maintenance work.

All lines, hoses and screw connections must be inspected for leaks and
externally visible damage at regular intervals. Damage has to be repaired
promptly by qualified personnel; damaged parts must be replaced with original
parts.

Protective devices may only be removed after the product is standing still and
has been secured to prevent restarting.

All safety equipment must be installed properly and has to be fully functional
each time before the product is put into use.

The required personal protective equipment must be provided by the operating
company.

All safety and protective devices have to be inspected regularly.