ABM International LA-763, Инструкция по эксплуатации

Страница: 40 / 71

Start backtacks
If this key is pressed, the backtacks at the beginning of the seam (start backtacks) are
switched on or off. The number of forward stitches (A) or reverse stitches (B) for the start backtacks can
be changed by pressing the +/- key underneath. To convert from double backtack to single backtack
set the number of stitches for the corresponding seam section at zero.
End backtacks
If this key is pressed, the backtacks at the end of the seam (end backtacks) are switched on or
off. The number of reverse stitches (C) or forward stitches (D) can be changed by pressing the +/- key
underneath. To convert from double backtack to single backtack set the number of stitches for the
corresponding seam section at zero.
Needle position
If this key is pressed the „needle raised after sewing stop“ function is switched on or off.
When the function is switched on, the needle positions at t.d.c. after sewing stops.
Foot position after stop
If this key is pressed the „foot raised after sewing stop“ function is switched on or off.
When the function is switched on, the presser foot is raised after sewing stops.
Foot position after trimming
If this key is pressed the „foot raised after thread trimming“ function is switched on or off.
When the function is switched on, the presser foot is raised after thread trimming.
Thread trimmer
If this key is pressed the thread trimming function is switched on or off.
Darning program
If this key is pressed the darning program function is switched on or off.
The counted seam function is switched off automatically.
Counted seam
If this key is pressed the counted seam function is switched on or off.
The darning program function is switched off automatically.
TE/Speed
If this key is pressed once the speed limit for the sewing mode is activated.
If this key is pressed twice (within 5 seconds) the machine changes from sewing to input mode.
p-40-ed-2-en 7.5 04-03-08