Ablerex Buck 1000W, Руководство пользователя

Страница: 19 / 24

19
2.3 Error Codes
When the charger can not work normally, it will show the error code on the LCD display as
Table 1. You may proceed troubleshooting indicated as below.
Error Code Description Trouble Shooting
AL04 Input Over-voltage Reduce input voltage
AL05 Input Under-voltage Increase input voltage
ER04
Battery Voltage different
from Setting
Ensure battery voltage and proceed
setting
ER11 Input over power
Decrease solar power (Watt) or reduce
load connected
ER13 Output Short Circuit
Check to see if the output short circuit is
removed.
ER17 EEPROM Error Consult with your local agent
ER18 Over-heat
Reduce the ambient temperature and
reduce load connected.
ER25 Input Over-current
Decrease solar power(Watt) or reduce
load connected.
ER28 Output Voltage too high Re-start the charger
ER32 Memory Error Re-start the charger
ER33 Charger is self-locked
Check to see if the operation condition is
complied with what the charger requires.
ER34 Crystal damage Consult with your local agent
ER35 Output voltage too low
The charger will be automatically re-start
after 15 seconds.
ER36 Bat. Over-heat
Reduce the environmental temperature of
the battery
ER37 Fan out of order Check to see if fan is blocked.
ER38 AUTO Function Enable Reset the output voltage manually
ER39 Failure in
“
save
”
Re-setting
Table 1 Error Code
Caution!
Before any troubleshooting is on process, make sure the solar panels and batteries are
disconnected. If the error code still exists, please consult with your local agent.