Ablerex Buck 1000W, Руководство пользователя

Страница: 13 / 24

13
2.1.2Battery Capacity(AH) Setting
Step1: It indicates the current battery capacity when getting into Battery Capacity setting.
Step2: Select desired battery capacity (AH) by scroll key or key. The
digit with flashing cursor means the desired one to be changed. If you would like
to change the left-hand/right-hand digit, you may press key or key
respectively.
Step3: Battery Capacity(AH) is selectable from 1~999AH. When the desired
capacity(AH) is selected, please press key to save till “SAVE” shown on
the screen. When “SAVE” disappears on the screen, it means your setting is done
successfully.
Step4: To escape from Battery Capacity(AH) setting, please press key for a while.
Caution: If there is ER39 shown on the LCD display after the setting is completed and a
re-starting process is done, it means your setting is failed. Please proceed desired
setting once again.
2.1.3Battery Voltage Setting
The selectable battery voltage settings are 12V, 24V, 36V, 48V or auto. The charger will
check the selected voltage matched to the batteries connected. In case it is out of
acceptable range, it will show it as battery out of order. Meanwhile, the user can self set
battery under-voltage and battery over-voltage. When the AUTO setting is selected, the
voltage window will be as below:
Battery
Voltage
Auto Detecting Voltage
Range
Self-Setting Voltage
Range(default)
48V 44~56V 42~54.6V
36V 33~42V 28~40.9V
24V 22~28V 18~27.3V
12V 11~14V 9~13.6V
Step1: When enter into Battery Voltage setting, current battery voltage will be shown on
the LCD display.