Ablerex Buck 1000W, Руководство пользователя

Страница: 10 / 24

10
A
B
C
D
E
Approx. 3 seconds later, the LCD display will show as drawing B and the charger is under
initialization.
When the charger is in normal operation, it shows the current input voltage of the solar
panel as shown in drawing C, then the green LED lights up to indicate that the charger is
connected with batteries and also charges to the batteries. On the contrary, it shows that
there are no batteries connected when the green LED is blinking and the output voltage is
fixed.
If there is a defect occurred during operation, the LCD display shows Er04 as shown
below. For more detailed error code, please refer to Table 1 Error Code.
If there is over-voltage or under-voltage occurred during operation, the LCD display will
show Alarm code as indicated below and the Amber LED lights up.
Press key to indicate the parallel address of the charger as shown as drawing F and
press key once again or wait for 10 seconds to go back to Main Menu.