ABL Wallbox eMH2, Руководство по установке

Страница: 36 / 60

| Configuring the Wallbox eMH2 –
Setting up data communication
36
NOTE
Communication with the backend
ƒ
The router's firewall must be set up in such a way that communication is possible between the charging
station and the OCPP backend.
ƒ
You can obtain all the access data from your backend operator. A description of the set-up can be found on
page 38.
Connection via the LTE interface
An LTE USB stick is factory pre-installed at the SBC in the connections area behind the electronic components cover
in every Wallbox eMH2/reev backend bundle. You can retrofit all other Controller Wallboxes eMH2 for LTE function-
ality using the LTE accessory package
E3BLTE1
(see "Accessories" on page 10 and "Installing and connecting the
E3BLTE1" on page 24). A mobile network connection can be established between the SBC and an OCPP backend via
the LTE USB stick of the Controller charging station.
1 2 3 4
Controller with Extender
charging station(s)
1 2
LTE
1 2 3 4
Backend (e.g.
reev
)
ƒ
In order to establish a mobile network connection with an OCPP backend, a suitable SIM card must be installed in
the LTE USB stick when commissioning. You can find information about installation in the manual accompanying
the LTE USB stick.
ƒ
The SIM card is usually included with your backend subscription: in this case, you will also receive the activation
data from your backend operator.
Proceed as follows to set up communication via LTE:
1
Click the Connectivity > Cellular tab and enter
the information provided by your backend operator
for the
Access point name (APN)
,
Username
and
Password
.
y
Confirm by clicking the
Save
button.
2
Switch to the Maintenance > System tab and
click the
Hard reset
button in the
System Restart
section.
y
Your Controller/Extender system will now
restart with the selected settings.
A connection can now be established between the Controller charging station and the backend via mobile network
communications.