ABL Wallbox eM4 Single, Руководство по установке

Страница: 49 / 68

49 Replacing the RCCB flap
Replacing the RCCB flap
You can replace the side RCCB flap of the power module if it is damaged or otherwise needs to be replaced.
End customer
Specialist electrical
contractor
Construction
Required components:
Number / spare part
100000256 / Spare part eM4 RCCB flap ABL
Accessories
Key for RCCB flap, supplied with the wallbox and the spare part
Tool –
Proceed as follows to replace the RCCB flap on the Wallbox eM4 Single:
1 Provided that the RCCB flap is mechanically intact, unlock it
with the key and fold it upwards.
2 Hold the RCCB flap open at an angle of 90° and pull it off
using minimal force.
x
The RCCB flap will pop out of the hinge mount in the
housing.
3
Place the two outer hinge pins of the new RCCB flap on the
hinge mounts and press them into the housing using minimal
force.
x
The hinge pins will snap into the hinge mounts.
4
Check the replaced RCCB flap to ensure that it moves freely
and then lock it with the key.