ABL Wallbox eM4 Single, Руководство по установке

Страница: 38 / 68

38 Configuring the Wallbox eM4 Single
7
After the connection has been successfully established, the
wallbox is displayed along with its serial number and the
status
Connected
.
J
Tap
Continue
to protect your wallbox from unauthorised
access using a custom password.
NOTE
Updating the software version
After the connection is established and during operation, the ABL Configuration App regularly checks whether up-to-date soft-
ware is available for the wallbox. If a message to this effect appears, you must install this update before you can continue.
8 Enter your password in the Create password field, taking
into account the specified requirements, and confirm it by
entering it again in the Repeat password field.
J
Tap
Continue
to continue configuring the wallbox.
After setting up the access password, you can now start configuring the operating mode you selected in
step 5
.
NOTE
Access to wallbox configuration
You can use the password you have created to access the current configuration of the wallbox at any time in order to change it:
This process is called
Reboarding
and is described in the section “Control Board settings and reboarding” from page 40.
x
Please note that the password you have created is not stored in your mobile device’s password manager or Keychain, but is
output as a QR code (login credentials) during setup.
x
You can also write down the password and keep it in a safe place for reboarding.