Abit SV-1A, Руководство пользователя

Страница: 30 / 56

3-4 Chapter 3
Head:
This item configures the numbers of read/write heads.
Precomp:
This item displays the number of cylinders at which to change the write timing.
Landing Zone:
This item displays the number of cylinders specified as the landing zone for the
read/write heads.
Sector:
This item configures the numbers of sectors per track.
Back to Standard CMOS Features Setup Menu:
Drive A & Drive B:
This item sets the type of floppy drives (usually only Drive A) installed.
Floppy 3 Mode Support:
This item allows you to use “3 Mode Floppy Drive” in Japanese computer system by
selecting drive A, B, or both. Leave this item to its default [Disabled] setting if you
are not using this Japanese standard floppy drive.
Halt On:
This item determines whether the system stops if an error is detected during system
boot-up.
[All Errors]:
The system-boot will stop whenever the BIOS detect a non-fatal error.
[No Errors]:
The system-boot will not stop for any error detected.
[All, But Keyboard]: The system-boot will stop for all errors except a keyboard
error.
[All, But Diskette]: The system-boot will stop for all errors except a diskette error.
[All, But Disk/Key]:
The system-boot will stop for all errors except a diskette or
keyboard error.
SV-1A