Hardware Setup
2-3
2.2.1.
Installing and Removing Memory Modules
Power off the computer and unplug the AC power cord before installing or removing
memory modules.
1. Locate the DIMM slot on the
board.
2. Hold two edges of the DIMM
module carefully, keep away of
touching its connectors.
3. Align the notch key on the
module with the rib on the slot.
4. Firmly press the module into the
slots until the ejector tabs at
both sides of the slot automatically snaps into the mounting notch. Do not force
the DIMM module in with extra force as the DIMM module only fit in one
direction.
5. To remove the DIMM modules, push the two ejector tabs on the slot outward
simultaneously, and then pull out the DIMM module.
ATTENTION:
Static electricity can damage the electronic components of the
computer or optional boards. Before starting these procedures, ensure that you are
discharged of static electricity by touching a grounded metal object briefly.
User’s Manual
Содержание SV-1A
