Abit Fatal1ty FP-IN9 SLI, Руководство пользователя

Страница: 23 / 88

Hardware Setup
FP-IN9 SLI 1-17
1.8.2 Serial ATA Connectors
Each SATA connector serves as one single channel to connect one SATA device by SATA cable.
The RAID 0/1/0+1/5/JBOD configuration is also possible by the combination of disk arrays
through these SATA connectors:
To connect SATA device:
1. Attach either end of the signal cable
to the SATA connector on
motherboard. Attach the other end to
the SATA device.
2. Attach the SATA power cable to the
SATA device and connect the other
end from the power supply.
※
The motherboard in this photo is served for DEMO only, and may not be the
same type or model as the one described in this user’s manual.