Abilia Control Medi Standard, Руководство пользователя

Страница: 38 / 52

The
Code
button always has the same code irrespective of which level you use. If you have to
program a new coded channel there are two methods of doing so. You can set the 4096 code on
any level and button. It is recommended to keep the 4096 code on the
Code button
.
NOTE! When you add a new coded channel it is added to just one level. If you want to use the Code
button with the same code on several levels, you must add it to each level.
Method one: record the code from another transmitter, as described under
Recording IR channels
from another Transmitter
.
For method two a binary code is entered. Make up the binary code yourself or else use a code that
is already set in an IR receiver or IR transmitter.
There are two types of IR receivers: an older type of receiver where you set the code with a 12-pole
switch, or a newer type where the IR receiver is programmable. The principle is the same when it
comes to creating the binary code.
Fig 3
shows a 12-pole switch. Switches 1, 4, 6 and 12 are in the
“On” position, the others are in the “Off” position.
1 2 3 4 5 6 7 8 9 10 11 12
2048 1024 512 256 128 64 32 16 8 4 2 1
On
Off
Fig 3
The following example describes how the binary code is created according to method two:
1.
First press
---
and then simultaneously press
1
for 2 seconds. When you release the buttons
the “Setting” alert sounds and the indication lamp on button 1 flashes.
2.
Press
2
and then press
2
again.
3.
Select the level where the 4096 code is to be set with
---
.
4.
Select the button where the 4096 code should be saved. (Button
!
is recommended.)
5.
Enter the code by pressing on
1
or
2
.
1
= switch in Off position and
2
= switch in On position.
Press twelve times in turn;
2
,
1
,
1
,
2
,
1
,
2
,
1
,
1
,
1
,
1
,
1
,
2
, ( Fig 3 ).
6.
If the action is successful, the “Success” alert sounds. If something goes wrong or takes too long,
the “Error” alert sounds.
7.
The code is now set on your selected button. NOTE! The code above is just an example and
should be different for different users. Make a note of the chosen code for future usage.
NOTE! If you have added a coded channel to the Code button and you want to use the Code button
with the same code on several levels, you must add it to each level individually.
Adding a 4096 code
Press
---
+
1
2 sec
,
2
,
2
, choose the level with
---
, choose the button
X
, then press
1
or
2
12 times.
1
= Off position.
2
= On position.
Default setting: Random code