Abicor Binzel iROB 501, Оригинальная инструкция по эксплуатации

Страница: 105 / 160

iROB
®
501, iROB
®
401, iROB
®
301 7 Operation
EN - 25
Activating password protection
Canceling password protection
7
Set the tens and ones digits in the same way with the
<Parameter setting> knob.
8
Check the password and press <Enter> twice.
The password is saved.
+
1
Press and hold <Enter> for more than 3 seconds.
Password protection is active.
1
Press and hold <Enter> for at least 3 seconds.
<PAS → Loc> flashes alternately in the left digital display.
2
Set the hundreds digit with the <Parameter setting> knob.
3
Press the <Parameter selection> button.
The tens digit starts to flash.
4
Set the tens and ones digits in the same way with the
<Parameter setting> knob.
5
Press <Enter>.
If the number matches the stored password, both digital
displays show <good> and password protection is removed.
If the number does not match the stored password, <bAd> is
displayed on the left digital display.
► Use the <Parameter setting> knob to re-enter the
password as described above.
A
m/min.
sec.
Hz
±
V
%
JOB.No.
A
m/min.
sec.
Hz
±
V
%
JOB.No.
A
m/min.
sec.
Hz
±
V
%
JOB.No.