Abicor Binzel Aut-Wig, Руководство по эксплуатации

Страница: 27 / 76

EN - 9
AUT-WIG 6 Putting into operation
6.1.2 AUT-WIG 200W
1 Screw collet (3) with gas diffuser (2) into torch body.
2 Insert the tungsten electrode (4) into the torch body (2) from the front and
tighten it with the gas diffuser (2) .
3 Screw gas nozzle (1) onto gas diffuser (2) .
6.2 Tungsten electrode
The electrode type is set by EN ISO 6848. The max. length of electrode
depends on the type of torch.

2.3 Technical Data on page EN-4
6.3 Connecting the TIG welding torch
1 Connect machine-side hose assembly to power supply and secure it with a
connection nut.
6.4 Setting the shielding gas quantity
1 Gas nozzle
2 Gas diffuser
3 Torch body
4 Collet
5 Tungsten electrode
Fig. 2 Equipping the AUT-WIG 200W
1 2
3
4 5
NOTE
• The welding performance is affected by the selection of the tungsten
electrode and by wear. A smooth, groove-free sharpened end of the
tungsten electrode has a positive effect on the welding result.
NOTE
• Please observe the operating instructions of the power supply
manufacturer.
NOTE
• The type and quantity of the shielding gas depends on the welding task
and the gas nozzle geometry.