Abicor Binzel Aut-Wig, Руководство по эксплуатации

Страница: 34 / 76

EN - 16
12 Disposal AUT-WIG
12.1 Materials
This product consists for the most part of plastics, steel and non-ferrous metals.
Steel and non-ferrous metals can be molten in steel and iron works and are thus
almost infinitely recyclable. The plastics materials used are marked in
preparation for sorting and separation of the materials for later recycling.
12.2 Materials
This product consists for the most part of plastics, steel and non-ferrous metals.
Steel and non-ferrous metals can be molten in steel and iron works and are thus
almost infinitely recyclable. The plastics materials used are marked in
preparation for sorting and separation of the materials for later recycling.
12.3 Consumables
Oils, greases and cleaning agents must not contaminate the ground and not
enter the waste systems. These materials must be stored, transported and
disposed of in suitable containers. Please observe the relevant local regulations
and disposal instructions of the safety data sheets given by the manufacturer of
the consumables. Contaminated cleaning tools (brushes, rags, etc.) must also
be disposed of in accordance with the information provided by the
manufacturer of the consumables.
12.4 Packaging
ABICOR BINZEL has reduced the packaging for shipping to a minimum.
Packaging materials are always selected with regard to their possible recycling
ability.