c. Route the tubing to exit the Snug Vest through the Vest Zipper
Opening on the top of the Vest Zipper track (see Figure B). Confirm
that the tubing is not kinked.
2) Insert the pump into the Snug Vest:
a. Place the pump into the Pump Pocket with the screen
on the bottom and facing out (see Figure C).
b. Using the Pull Tab, confirm that both the display and
the keypad are visible through the Pocket Window.
c. Route the tubing to exit through the Gray Zipper Opening on the side
of the Pump Pocket. Make sure that the tubing is not kinked.
d. Zip the Pump Pocket shut.
e. Zip the Vest Zipper.
Figure B
Figure C