5
Enter
▼
▲
or
Enter
Enter
or
Without security
access
Store.
Gain access to Electrical Calibration procedure (see Section 4).
or
Advance to next parameter.
Number of Retransmission Outputs
Up to 3 retransmission output modules can be fitted (2 max. on basic
analysers). Determine how many retransmission modules are fitted – see Fig.
3.4C.
Set the number of retransmission outputs required.
N o t e s .
a) Ensure that the module positions are used sequentially, i.e. 1, 1 and 2, 1,
2 and 3; other permutations are not permissible.
b) The number of retransmission outputs in the Analogue Retransmiss
P a g e
(see Operating Instructions) correspond to the value selected. If '0' is
selected the page is omitted.
Store.
Advance to next parameter.
Number of Relay Outputs
Up to 4 relay outputs can be used, with module positions as follows (see Fig.
3.4C):
Module position 1 – 1 relay
Module position 2 – 1 relay
Module position 3 – 2 relays
N o t e s .
a) Ensure that the module positions are used sequentially, i.e. 1, 1 and 2,
1, 2 and 3; other permutations are not permissible.
b) The number of relay outputs displayed in the Relay Allocation Page
(see
ZMT/0011) correspond to the value selected. If '0' is selected the page is
omitted.
Store.
Advance to next parameter.
Single or Dual Fuel
Select single or dual fuel to suit the application:
Dual fuel.
or
Single fuel.
N o t e .
If 'Single Fuel' is selected 'Fuel 2' parameter is omitted from the Relay
Allocation Page
– see Operating Instructions.
Store.
No of An Tx & ENT
➞
➞
No of Rlys & ENT
➞
➞
Single fuel or
➞
Dual fuel
➞
or
With security
access – to
Electrical
Calibration
▼
▲
or
Set the number of relay outputs required.
Enter
▼
Single fuel
▲
Dual fuel
Continued from opposite page.
Continued overleaf.