ABB UNV-F Скачать руководство пользователя страница 15

Страница: 15 / 63

Primary Switch Mode Inverter

UNV-F

Operation Manual

Page 14 (28)

BHB.UNV-F.D65-1050.HB101

The red LED "Ui>" signalizes inverter input voltage high

(voltage is higher than adjusted threshold Ui>)

The inverter switches off without delay time (protection

against overvoltage). The inverter switches on again if the

input voltage is lower than adjusted switch off threshold.

6.3.2 Output voltage monitoring

The inverter output voltage is transmitted to the control unit

by a voltage transformer and is compared to internally ad-

justed values.

If there is a correct output voltage the green LED "Uo O.K."

is on. If the output voltage is lower than the adjusted

threshold (e.g. high overload or short circuit), the inverter

switches off with a delay time of 2.5 sec. After 15 sec follows

an automatic restart.

The red LED Error is on. The inverter is continuously short

circuit proof.

6.3.3 Monitoring of Overheating

Signal "T>" ( red LED ) ; if the internal temperature of the

inverter is higher than the adjusted threshold. High ambient

temperature, poor cooling , permanent overload (appr. 20-

25%) or a defective fan can cause overheating of the unit.

The inverter switches off with an adjustable delay time. The

inverter switches on again if the temperature is lower than

the adjusted switch on threshold. Additionally, the fan volt-

age and current characteristic is monitored to detect a defec-

tive fan. This is indicated by a blinking LED T> .

6.3.4 Signals

All operation modes and error-states are indicated by LED s

situated on the front panel. The collective failure signal is

available by an isolated relay contact on connector X1.

Max. contact load: 60V DC / 1A, 110V DC / 0.45A.

In case of failure the contacts COM and NO are closed.

6.3.5 Adjustment of output parameters and

monitoring thresholds

The adjustment of output parameters and monitoring thresh-

olds is easy. The values can be adjusted with the two front-

keys by displaying the actual value.

The inverter offers two adjustment menus:

Содержание UNV-F
































































Результаты поиска

Содержание UNV-F

Отзывы:

Похожие инструкции для UNV-F

Бренды по названию

Популярные бренды

ABB UNV-F, Руководство по эксплуатации

Результаты поиска

Содержание UNV-F

Отзывы:

Похожие инструкции для UNV-F

Бренды по названию

Популярные бренды