ABB UNV-F Скачать руководство пользователя

Страница: 3 / 63

Primary Switch Mode Inverter

UNV-F

Operation Manual

Page 2 (28)

BHB.UNV-F.D65-1050.HB101

Notes to this manual

ATTENTION! Please read this manual very carefully before in-

stalling and commissioning the inverter.

This manual is part of the delivered device. Knowledge of this

document is obligatory for deals with the specified unit or

puts into operation. All works on the module such as trans-

port, putting into operation, adjustment and maintenance is

to be carried out by qualified personnel only. The rules for

prevention of accidents of the specific country and the uni-

versal safety rules acc. IEC 364 are to be observed!

This manual is equivalent to the technical revision of the in-

verter to the day of its printing. The contents are for infor-

mation purpose only and it is not included in the contract.

Technical changes between this manual and the actual prod-

uct are possible due to technical progress. The producer is

not responsible for uncorrect technical descriptions or data

inside this manual because there is no obligation to a perma-

nent actualization of this documentation.

The switch mode inverter will be manufactured according to

valid DIN- and VDE-standards such as VDE 0106 (part 100)

and VDE 0100 (part 410). The CE-label on the modules con-

firms the compliance with EU-standards for 73/23 EWG low

voltage and 89/339 EWG electromagnetical compatibility if

the installation and operation rules are observed.

All systems and components are delivered according to the

delivery conditions for electrical products and services of e-

lectronic industry and our own sales conditions. Changes of

contents in this manual such as technical data, dimensions,

weight and handling are possible.

In case of reclamation of delivered products please contact

us immediatily after receiving with delivery note number, de-

vice type, device number and fault description.

In case of visible changes on the device caused by the

customer (missing screws, new weldings, unmounted boards

a.s.o.) the customer looses the warranty. At operation under

non-specified conditions (acc. technical specifications), the

customer looses the warranty and there is no liability by the

producer. The responsibility for measurements to prevent ac-

cidents and material damages has the system operator (cus-

tomer), not the producer.

Содержание UNV-F
































































Результаты поиска

Содержание UNV-F

Отзывы:

Похожие инструкции для UNV-F

Бренды по названию

Популярные бренды

ABB UNV-F, Руководство по эксплуатации

Результаты поиска

Содержание UNV-F

Отзывы:

Похожие инструкции для UNV-F

Бренды по названию

Популярные бренды