manualshive.com logo in svg

ABB Terra 94 UL, Руководство по эксплуатации и установке, Страница: 64 / 90

Поделиться
Скачать
ABB Terra 94 UL Скачать руководство пользователя страница 64

64

“Operation and installation manual”

 - “Terra 94/124/184(NEVI) UL”

EN

8.3  Charging session

8.3.1  Start a charging session

•  Park the electric vehicle with the charge inlet within reach of the connector.

•  Turn off the electric vehicle.

•  On the touchscreen, select the applicable 

charging connector

 button.

NOTE 

If you skip this step, the EVSE selects the correct connector automatically when you connect the EV 

charge cable to the EV.

Danger: Hazardous voltage

Check the integrity of the charging cable and connector before connecting the electric vehicle. Do 

not start the charge session if damage is found.

•  Remove the EV charge cable from the EVSE.   

•  Connect the EV charge cable to the connector on the EV.

•  On the touchscreen, press the 

Start

 button.

•  If the touchscreen shows a message to authorize the charge session, follow the instruction that the 

touchscreen shows.

•  The EVSE charges the EV and shows the status on the touchscreen.

Danger: Hazardous voltage

The charging connector will locked in position in order not to allow removal during the charging 

phase.

8.3.2  Stop a charging session

•  On the touchscreen, press the 

Stop

 button.

NOTE 

When the battery is full, the charge session stops automatically.

Danger: Hazardous voltage

The connector is unlocked by the vehicle.

•  Take the connector out of the vehicle and put it back in the connector holder on the EVSE.   

Содержание Terra 94 UL



























































































Отзывы:

Нет отзывов