ABB Terra 94 UL Скачать руководство пользователя страница 36

Страница: 36 / 90

“Operation and installation manual”

- “Terra 94/124/184(NEVI) UL”

4.1.3 Lifting of the EVSE

WARNING

• Risk of pinching or crushing, the EVSE is heavy

• Make sure that the hoisting equipment can lift the EVSE safely

• Obey the safety instructions that apply to the hoisting equipment

• Take into account the dimensions, the weight and the center of gravity of the EVSE.

CAUTION

• Do not drop the cabinet.

• Do not tilt the cabinet.

• Make sure there are no dynamic forces on the lifting points.

4.1.3.1 Forklift Truck / Wheel loader pallet fork

• Move the forks of the forklift truck in the gaps at the

side of the cabinet.

• Move the cabinet to the correct location.

4.1.3.2 Hoist / Crane

• Open the four holes

(B)

on the top cover by pushing the

precut cardboard in correspondence with each eyebolt.

• Connect the ropes or chain

(A)

of the hoisting equipment

to the four eyebolts

(B)

• Align eyebolts (unscrewing it) to ropes/chains direction

when lifting the EVSE.

DANGER

Inclination of ropes/chain from the vertical

shall not be higher than 30°.

Max 30°

• Move the cabinet to the correct location.

Содержание Terra 94 UL



























































































Результаты поиска

Содержание Terra 94 UL

Отзывы:

ABB Terra 94 UL, Руководство по эксплуатации и установке, Страница: 36 / 90

Результаты поиска

Содержание Terra 94 UL

Отзывы: