6.7 Change the channel configuration
1. At the
System Configuration
page, press the
Channels
icon
to display the
I/O Groups 1(6) Channels
page.
2. Press the icon associated with the required
Group 1 (6)
Channels
(for example
) to display the
Channel 1 (01
…06)
dialog.
3. Press the
tab and then the
icon
associated with each field to enter and configure
Setup
parameters – press
to accept the content at each
field.
4. Repeat for all other tabs on the
Channel 1.01 (1.06)
dialog
and for all other required channels.
When all fields have been configured, press
to return
to the
I/O Groups 1(6) Channels
page then
to return
to the
System Configuration
page.
5. Proceed to the next step (6.8) to set up the inputs /
outputs (I/O).
6.8 Set up the inputs / outputs (I/O)
1. At the
System Configuration
page, press the
I/O
icon
to open an
I/O
page displaying fitted I/O modules.
2. Press the icon associated with the required module to
display the dialog and fields associated with that module.
3. Configure parameters for each required module.
4. When all parameters have been configured, press
to
return to the
I/O
page then
to return to the
System
Configuration
page.
5. Proceed to the next step (6.9) to exit
Configuration
level
and save changes.
6.9 Save current configuration and exit
1. Press
at the
System Configuration
page – a prompt
is displayed with options to
Apply Changes
,
Export
Configuration
,
Return to Configuration Mode
or
Discard
Changes
:
2. Press
Apply Changes
(
) to save the current
configuration and return to the
Operator
page.
3. Proceed to the next step (6.10) to start recording.
6.10 Start recording (archiving)
1. Open the media door and insert the external media card
and close the door.
Recording is initiated automatically.
Note.
Use the
arrows to select
different
Channels
in the same process group.
Note.
I/O modules are detected automatically.
Setup
Note.
Alternative archive media can be used –
refer to the Operating instructions (OI/RVG200-EN)
for compatible media types.
Apply Changes
Export Configuration
Return to Configuration Mode
Discard Changes
System Configuration
14
CI/RVG200–EN
