ABB RobotStudio 2022.1 Скачать руководство пользователя страница 21

Страница: 21 / 30

As a result, the generated work envelop may appear distorted.

Update of current selection in the 3D graphics window may be delayed

A problem related to the graphics driver has been observed on certain PCs. The problem is that the

update of the current selection in the 3D graphics is delayed until the next redraw.

Workaround:

Add or uncomment the following line in the file RobotStudio.exe.config

add

key

”DoublePresentWorkaround”

value

”true”

Failure to open Pack&Go file to same folder the second time

RobotStudio will prevent Pack&Go files to be opened to the same folder a second time if the station

contains VC systems with the EPS or SafeMove option. This is by design to prevent the safety controller

configuration file to be accidentally overwritten.

Workaround:

Remove the write protection manually using Windows Explorer.

Updates of instruction template and code snippets

RobotStudio will not automatically update the user files for instruction templates and code snippets

files in the folders:

…\My Documents\RobotStudio\Instruction Templates
…\My Documents\RobotStudio\Code snippets

Workaround:

The user has to manually copy the latest files from

%ProgramFiles%\ABB Industrial IT\Robotics IT\RobotStudio 5.xx\Instruction Templates

and

%ProgramFiles%\ABB Industrial IT\Robotics IT\RobotStudio 5.xx\Code Snippets

to the data folder.

I/O signals configured with access level 'DEFAULT'

When IO signals are configured with access level 'DEFAULT', only input signals are possible to set/reset

from the I/O Simulator and I/O Window. To be able to affect also output signals, set the access level to

‘ALL’ for them in the Configuration Editor.

VC does not start with RRI option and GSI folder structure missing

The VC will hang when started with a system containing the RobotWare option RRI (Robot Reference

Interface) if the GSI folder structure is missing.

Workaround:

Create GSI Folder before starting the VC inside the

HOME

directory of the system. See the

Application Manual for Robot Reference interface for more information.

System in Guard Stop state in Automatic mode after run-time error

Certain run-time errors may cause the controller system to enter Guard Stop state in Automatic mode.

This is the same behavior as in a physical robot controller system. This typically happens when a run-time

error related to Conveyor Tracking occurs. A simulation cannot be started when the controller is in this

state.

Workaround:

To reset the controller state, open the Control Panel window and first switch to Manual

21/30

Содержание RobotStudio 2022.1































Результаты поиска

Содержание RobotStudio 2022.1

Отзывы:

Похожие инструкции для RobotStudio 2022.1

Бренды по названию

Популярные бренды

ABB RobotStudio 2022.1, Руководство пользователя

Результаты поиска

Содержание RobotStudio 2022.1

Отзывы:

Похожие инструкции для RobotStudio 2022.1

Бренды по названию

Популярные бренды