background image

IEC 61850

Substation automation communication standard

IEC 61850–8–1

Communication protocol standard

IEEE

Institute of Electrical and Electronics Engineers

IEEE 802.12

A network technology standard that provides 100 Mbits/s on twisted-pair or
optical fiber cable

IEEE P1386.1

PCI Mezzanine Card (PMC) standard for local bus modules. References the
CMC (IEEE P1386, also known as Common Mezzanine Card) standard for
the mechanics and the PCI specifications from the PCI SIG (Special
Interest Group) for the electrical EMF (Electromotive force).

IEEE 1686

Standard for Substation Intelligent Electronic Devices (IEDs) Cyber Security
Capabilities

IED

Intelligent electronic device

IET600

Integrated engineering tool

I-GIS

Intelligent gas-insulated switchgear

IOM

Binary input/output module

Instance

When several occurrences of the same function are available in the IED,
they are referred to as instances of that function. One instance of a function
is identical to another of the same kind but has a different number in the
IED user interfaces. The word "instance" is sometimes defined as an item of
information that is representative of a type. In the same way an instance of
a function in the IED is representative of a type of function.

IP

1. Internet protocol. The network layer for the TCP/IP protocol suite widely
used on Ethernet networks. IP is a connectionless, best-effort packet-
switching protocol. It provides packet routing, fragmentation and
reassembly through the data link layer.
2. Ingression protection, according to IEC 60529

IP 20

Ingression protection, according to IEC 60529, level 20

IP 40

Ingression protection, according to IEC 60529, level 40

IP 54

Ingression protection, according to IEC 60529, level 54

IRF

Internal failure signal

IRIG-B:

InterRange Instrumentation Group Time code format B, standard 200

ITU

International Telecommunications Union

LAN

Local area network

LIB 520

High-voltage software module

LCD

Liquid crystal display

LDAPS

Lightweight Directory Access Protocol

LDCM

Line data communication module

LDD

Local detection device

LNT

LON network tool

LON

Local operating network

MCB

Miniature circuit breaker

MCM

Mezzanine carrier module

MIM

Milli-ampere module

MPM

Main processing module

MVAL

Value of measurement

Section 10

1MRK 514 030-UEN Rev. C

Glossary

42

Switchgear control unit SAM600-IO

Installation manual

© 2017 - 2021 Hitachi Power Grids. All rights reserved

Содержание Relion SAM600-IO























































Отзывы: