For example, the function can be enabled and disabled with the
Operation
setting.
•
Each function block symbol shows the available input/output signal.
•
the character ^ in front of an input/output signal name indicates that the signal name may
be customized using the PCM600 software.
•
the character * after an input signal name indicates that the signal must be connected to
another function block in the application configuration to achieve a valid application
configuration.
•
Dimensions are provided both in inches and millimeters. If it is not specifically mentioned then
the dimension is in millimeters.
Section 1
1MRK 514 030-UEN Rev. C
Introduction
6
Switchgear control unit SAM600-IO
Installation manual
© 2017 - 2021 Hitachi Power Grids. All rights reserved