A
B
C
IEC17000051-1-en.vsdx
GUID-B1BFADED-7460-4CE6-A992-93B77DCD1105 V1 EN-US
Figure 2:
Different mounting methods
Description
A
19” Panel rack mounting
B
Wall mounting
C
Side-by-side rack mounting
5.3.1
19” panel rack mounting
IP10313-1 v1
5.3.1.1
Overview
SEMOD127656-5 v4
All IED sizes can be mounted in a standard 19” cubicle rack by using a suitably sized mounting kit
consisting of two mounting angles, their fastening screws and washers.
The mounting angles are reversible which enables mounting of IED size 1/2 x 19” either to the left or
the right side of the cubicle.
A separately ordered rack mounting kit for side-by-side mounted IEDs or IEDs
together with RHGS cases should be selected so that the total size equals 19”.
Use only the screws included in the mounting kit when mounting the plates and the
angles on the IED. Screws with wrong dimension may damage the PCBs inside the
IED.
Section 5
1MRK 514 030-UEN Rev. C
Mounting
14
Switchgear control unit SAM600-IO
Installation manual
© 2017 - 2021 Hitachi Power Grids. All rights reserved
