IEC17000158-1-en.vsdx
IEC17000158 V1 EN-US
Figure 16:
IED summary
8.3
Removing the IED
GUID-6F99E661-D319-4782-97E9-3A864B1E972D v3
Before removing the IED, make sure that auxiliary power is turned off and all wiring is disconnected.
For upgrade purposes the IED does not need to be removed. Before removing the
IED check with your local Hitachi Power Grids office if the IED can be upgraded.
8.4
Sending the IED for repair
AMU0600445 v5
In case of product problems, contact the nearest Hitachi Power Grids office or representative for
consultation and instructions.
8.5
Exchanging the IED
GUID-1EB39784-696C-4B2E-B560-4115F721DCAB v10
To exchange the IED with another identical unit, remove the IED and install the new one. Contact
your local Hitachi Power Grids for information about exchangeable units.
Section 8
1MRK 514 030-UEN Rev. C
Removing, repairing and exchanging
34
Switchgear control unit SAM600-IO
Installation manual
© 2017 - 2021 Hitachi Power Grids. All rights reserved
