ABB RED650, Руководство по применению

Страница: 43 / 454

Section 3 Configuration
3.1 Description of configuration RED650
3.1.1 Introduction
GUID-79B8BC84-4AAB-44E7-86CD-FF63098B009D v2
The basic delivery includes one binary input module and one binary output
module, which is sufficient for the default configured IO to trip and close circuit
breaker. All IEDs can be reconfigured with the help of the application
configuration tool in PCM600. The IED can be adapted to special applications and
special logic can be developed, such as logic for automatic opening of
disconnectors and closing of ring bays, automatic load transfer from one busbar to
the other, and so on.
The basic IED configuration is provided with the signal matrix, single line diagram
and the application configuration prepared for the functions included in the product
by default. All parameters should be verified by the customer, since these are
specific to the system, object or application. Optional functions and optional IO
ordered will not be configured at delivery. It should be noted that the standard only
includes one binary input and one binary output module and only the key functions
such as tripping are connected to the outputs in the signal matrix tool. The required
total IO must be calculated and specified at ordering.
The configurations are as far as found necessary provided with application
comments to explain why the signals have been connected in the special way. On
request, ABB is available to support the re-configuration work, either directly or to
do the design checking.
3.1.1.1 Description of A11
GUID-A505CEFC-B3C6-459E-A1EC-CE1567F3E6F4 v1
2 / 3 terminal line differential protection and six zone distance protection with
quadrilateral and mho characteristic, for single and three-pole tripping.
1MRK 505 393-UEN B
Section 3
Configuration
Line differential protection RED650 2.2 IEC 37
Application manual