manualshive.com logo in svg

ABB PSTX30, Руководство по установке и пусконаладке

Поделиться
Скачать
ABB PSTX30 Скачать руководство пользователя страница 3

Thank you for selecting this ABB PSTX softstarter.  
Carefully read and make sure that you understand all 
instructions before you mount, connect, configure the 
softstarter. 

This manual is intended for installation and advanced 
usage of the PSTX softstarter. For quick and easy 
installation, see 1SFC132082M9901 - Softstarters Type 
PSTX30...PSTX370User Manual short form. The manual is 
available on

 ABB website.

When this manual refers to

ABB website

: Select the link 

Control Products

, continue to 

Softstarters

 and type in 

the specified reference in the search field.

•

Only authorized and appropriately trained personnel are
allowed to install and make the electrical connection
of the softstarter in accordance with existing laws and
regulations.

•

Only authorized personnel are allowed to do service and
repair on the softstarter.

•

Unauthorized repair will effect the warranty.

•

ABB personell have to obey the instructions in

 ABB

CISE 15.4

.

•

This manual is a part of the PSTX softstarter.
Always keep this manual available when working with
the PSTX softstarter.

•

Examine the softstarter and the package when you
unpack your new PSTX softstarter. If there are damages,
please contact the transportation company or the ABB

reseller/office immediately.

•

Do not lift the softstarter by the connection bars, as this
can do damage to the softstarter.

Saftey notes

In this user manual, these symbols are used:

CAUTION

Caution symbol indicates the presence of a 
hazard which could result in personal injury.

WARNING

Warning symbol indicates the presence of a 
hazard which could result in damage to equipment 
or property.

INFORMATION

Information sign alerts the reader to relevant facts 
and conditions.

Modifications to data in this manual can be applied without 

notice.

 

General saftey information

CAUTION

Only authorized and appropriately trained 
personnel are allowed to install and make 
the electrical connection of the softstarter in 
accordance with existing laws and regulations.

WARNING

Examine the softstarter and the package when 
you unpack your new PSTX softstarter. If there 
are damages, please contact the transportation 
company or the ABB reseller/office immediately.

WARNING

Do not lift the softstarter by the connection bars, 
as this can damage the softstarter. 

WARNING

Only authorized and appropriately trained service 
personnel are allowed to do service and repair on 
the softstarter. Note: unauthorized repair will effect 
the warranty.

Read this first

Warning and saftey

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Содержание PSTX30



















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды