manualshive.com logo in svg

ABB PSTX30, Руководство по установке и пусконаладке

Поделиться
Скачать
ABB PSTX30 Скачать руководство пользователя страница 136

Status

Possible cause

Solution

Loading of parameters with fieldbus 
does not work properly.

Fieldbus settings.

•

Verify that parameters match between the PLC and
the softstarter fieldbus documentation for the fieldbus
protocol used.
Check that the Auto mode bit of the binary output
telegram setting is 1.

•

Check if the HMI is set to remote mode.

•

Check that the Local Mode digital input on the ABB
FieldBusPlug adapter is set to Remote.

•

Check that Fieldbus disable control in DI is not
connected.

•

Check that the Fieldbus control parameter is set to
On.

Displayed phase currents in screen 
does not correspond to motor current.

Inside Delta connection.

•

If the softstarter is connected Inside Delta, the phase

currents displayed are = 58% ( 1 /(√3)) of the motor

current.

Displayed current in screen is not 
stable.

The motor is too small.
The load on the motor is too small.
(Current is out of measuring 
range.)

•

Check that the softstarter corresponds to the motor
size.

Dark screen and LED is active

Power save mode.

•

Touch any key on the keypad.

Blank screen and no LED is active

Supply voltage is not connected.

•

Connect the Supply voltage according to the circuit
diagram.

•

If problem stays, contact your ABB Sales Office.

•

The RJ45 plug is missing
between the HMI and the
softstarter.

•

RJ45 Network cable is
damaged.

•

Check the RJ45 plug.

•

Check the RJ45 Network cable

10

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Содержание PSTX30



















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды