ABB OmniCore IRB 6740, Руководство по эксплуатации продукта, Страница: 252 / 664

Note Action
Dismantle and mounting tool:
3HAC028920-001 Pull out the shaft end with bearing, sealing
and distance using the dismantle and
mounting tool, according to user instruc-
tions enclosed with the equipment. 6
User instructions are enclosed with the
tool.
xx0900000813
Go to the user instructions enclosed with
the press tool.
DANGER
Handling the tool incorrectly will cause
serious injury.
Read and follow enclosed user instructions
for the tool.
Refitting the bearing, cradle
Use these procedures to refit the bearing in the cradle.
Refitting the shaft end and rear bearings
Note Action
Wipe clean all contact surfaces from resid-
ual grease and other contamination inside
the recess. 1
A
B
C
xx1400000367
A Mercasol (red dotted lines)
B Balancing device
C Shaft
Foundry Plus:
Apply Mercasol on matching surfaces on
the axis and balancing device. See the fig-
ure.
2
Apply some grease in the hole for the
bearing in the cradle.
Note
Do not apply grease on surfaces with Mer-
casol.
3
Continues on next page
252 Product manual - IRB 6740
3HAC085701-001 Revision: A
© Copyright 2023 ABB. All rights reserved.
5 Repair
5.4.3 Replacing the rear bearings on the balancing device
Continued