ABB OmniCore IRB 6740, Руководство по эксплуатации продукта, Страница: 231 / 664

Note Article number Spare part
The maintenance kit contains:
• End cover
• Radial sealing with dust
lip, (2 pcs)
• O-ring
• Spherical roller bearing
• Washer
3HAC087168-001 Maintenance set, link ear
Required tools and equipment
Note Article number Equipment
Used to secure lower arm. - Lock screw, M16x120
Used to unload or restore a balan-
cing device.
User instructions are enclosed
with the tool. 3HAC074411-001 Hydraulic press equipment, balan-
cing device
Used for removing and fitting
shaft and bearings.
User instructions are enclosed
with the tool. 3HAC028920-001 Dismantle and mounting tool
To be used with the press and
puller tools.
See technical specifications in the
user instructions for the press
equipment. 3HAC11731-1 Hydraulic cylinder
To be used with the press and
puller tools.
See technical specifications in the
user instructions for the press
equipment. 3HAC13086-1 Hydraulic pump 80 MPa
SA-10-8-NA1 - Lifting shackle
Lifting instruction 3HAC15880-2
enclosed. 3HAC15556-1 Lifting accessory (chain)
Content is defined in section
Standard toolkit on page 652 .
- Standard toolkit
Required service parts
Note Article number Consumable
Located at the front link ear of the
balancing device.
Replace if damaged. 3HAC4836-26 Protection plug
Tribol GR 100-0 PD 3HAA1001-294 Grease
Loctite 2400 (or equivalent Loctite
243) - Locking liquid
Loctite 2400 (or equivalent Loctite
243) - Locking liquid
Continues on next page
Product manual - IRB 6740 231
3HAC085701-001 Revision: A
© Copyright 2023 ABB. All rights reserved.
5 Repair
5.4.2 Replacing spherical roller bearing, balancing device link ear
Continued