Chapter 2 – Overview
NIBA-01 Installation and Start-up Guide
2-3
Status LEDs
There are eight status LEDs on the NIBA-01 Module. The table below
explains their functions.
Compatibility
The NIBA-01 is compatible with:
•
ACS 600 SingleDrive (SW vsn ACxA5000 or later)
•
ACS 600 MultiDrive (SW vsn AMxM103a or later)
•
ACS 600 MotionControl (ACP 600) (SW vsn APxA1100 or later)
•
ACS 600 Pump & Fan Drive (ACF 600) (SW vsn AF0A1020 or later)
•
DCS 500 (SW vsn DC21x226 or later)
•
All host stations equipped with an InterBus-S interface.
LED
Operation
Explanation
DDCS
flashing
DDCS initialisation in progress
flashing, ERROR lit
DDCS communication errors
lit
DDCS communication established
IB-S
flashing (fast)
Waiting for InterBus-S communication
flashing (slowly)
I/O mode
(process data communication enabled only)
flashing together with ERROR
ROM checksum test failed
flashing, ERROR lit
InterBus-S communication error(s)
lit
PCP mode (process data and PCP communication
enabled)
ERROR
lit
PCP initialisation error
lit, DDCS flashing
DDCS communication errors
lit, IB-S flashing
InterBus-S communication error(s)
flashing
RAM test failed
flashing together with IB-S
ROM checksum test failed
RC (Remote Bus Check)
lit
Cable connection correct, host not being reset
BA (Bus Active)
lit
Bus is active
TR (Transmit/Receive)
flashing
PCP communication active
U
L
lit
Module power OK (reset inactive)
RD (Remote Bus Disabled)
lit
Extended remote bus interface disabled
Содержание NIBA-01
