ABB NIBA-01 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 44

background image

NIBA-01 Installation and Start-up Guide

1-1

Chapter 1 – Introduction to This Guide

Overview

This chapter contains a description of the

Start-up and Installation

Guide for the NIBA-01 InterBus-S Adapter Module.

Intended Audience

The Guide is intended for the people who are responsible for installing,
commissioning, and using the NIBA-01 InterBus-S Adapter Module
with an ABB drive. The reader is expected to have a basic knowledge
of

•

electrical fundamentals and wiring practices

•

the drive and its control panel

•

the host controller software.

What This Guide
Contains

The installation and start-up of the NIBA-01 InterBus-S Adapter
Module are introduced in this Guide.

It is assumed that the drive is installed and ready to operate before
starting the installation of the adapter module. For more information on
the installation and start-up procedures of the drive, please refer to its
user documentation.

Safety Instructions are featured in the first few pages of this Guide.
Safety Instructions describe the formats for various warnings and
notations used within this Guide. This chapter also states the safety
instructions which apply to the installation and operation of the
NIBA-01 Module.

Chapter 1 – Introduction to This Guide contains a short description
of the Guide.

Chapter 2 – Overview contains a short description of the InterBus-S
system and the NIBA-01 InterBus-S Adapter Module, a delivery
checklist, and information on the manufacturer’s warranty.

Chapter 3 – Mechanical Installation contains the placing and
mounting instructions for the module.

Chapter 4 – Electrical Installation contains the wiring instructions.

Chapter 5 – Programming explains how to program the drive before
the communication through the adapter module can be started.

Chapter 6 – Communication contains a description of how data is
transmitted through the NIBA-01.

«
...
7
8
9
10
11
...
»

Содержание NIBA-01













































Отзывы:

Нет отзывов

Похожие инструкции для NIBA-01

Бренд: Quantum Страницы: 4

Бренд: Quantum Страницы: 2

Бренд: Yamaha Страницы: 6

Redbooks ServeRAID-8s

Бренд: IBM Страницы: 58

Бренд: Rocstor Страницы: 2

Бренд: Vantec Страницы: 4

Бренд: AzureWave Страницы: 31

Бренд: Syba Страницы: 2

Бренд: Aironet Страницы: 99

PACSystems RSTi

Бренд: GE Страницы: 172

Бренд: IOGear Страницы: 44

Бренд: TOOLCRAFT Страницы: 2

Бренд: Manhattan Страницы: 2

VERDEdri 17-10504K

Бренд: World Dryer Страницы: 8

Бренд: Allen-Bradley Страницы: 96

WorkForce 600 Series

Бренд: Epson Страницы: 135

Бренд: hager Страницы: 5

dx-uc202 - USB 2.0 PCMCIA Notebook Card

Бренд: Dynex Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды