Navigator 600 Silica
Single-stream
Appendix B – Diagnostics and Alarms
IM/NAV6S/SS–EN Rev. E
73
B.2 Audit Log and Alarm Event Log
The 'Audit Log' and 'Alarm Event Log' are used to display a list of events and alarms identified by icon, sequence number, date and
time.
The 'Audit Log' provides an historical log of system activity, the 'Alarm Event Log' provides an historical log of all alarm events in the
sequence in which they occurred.
When the number of entries in each log has reached 500, the oldest data is overwritten by the newest data. Entries are renumbered
so that the number of the oldest entry is always 00.
Both logs are accessible from the chart view and bar view.
B.2.1 Audit Log – Icons
B.2.2 Alarm Event Log – Icons
Note.
Use the
and
keys to scroll through log data.
Icon
Event
Power failed
Power restored
Configuration changed
File created
File deleted
Archive media inserted
Archive media removed
Archive media off-line
Archive media on-line
Archive media full
System error / reset archiving
Date / time or daylight saving start / end changed
Security change
FTP logon
Information
Failure
Maintenance required
Out of specification
Check function
Icon
Event
Active high process alarm
Inactive high process alarm
Active low process alarm
Inactive low process alarm
Active high latch alarm
Inactive high latch alarm
Active low latch alarm
Inactive low latch alarm
Active high annunciate alarm
Inactive high annunciate alarm
Active low annunciate alarm
Inactive low annunciate alarm
Active clean-in-progress alarm
Inactive clean-in-progress alarm
In sample alarm
Out of sample alarm
Daylight saving start / end changed
Alarm acknowledged
Operator message