30
M ICROG UA R D™ SOLUTION |
M I C R O G UA R D | U M/M I C R O G UA R D - EN R E V. B
• Analyzer type – select the type of analyzer to measure gas(es) .
Changing the analyzer type changes the live gases displayed
in the time trace graph .
• Change password – change your user password . After
confirming the password, a
Data saved message appears
indicating the password is changed .
. . .5 System Software
Figure 75 Setting’s Analyzer Type
Figure 77 About Screen
Figure 76 Settings Change Password
NOTE
This screen may be used at any time to change a password .
When you initially log in with the default password, you are
automatically prompted to change the password . For
details, refer to the
Software Startup section .
About
Tap the
Menu
icon, then select
About
to access the
About
screen (see Figure 76) . From this screen, you can see the license
details and load a new license .
Analyzer Shutdown
To shut down the analyzer, perform the following (see Figure
28):
1
Tap the
Menu
icon, scroll down, then select
Analyzer
shutdown
.
2
When the
Do you really want to shutdown the analyzer?
message appears, select the
checkmark
below the message .
The Bluetooth icon in the header changes from black to red to
indicate the Bluetooth connection is disabled . This is the
recommended method, instead of turning the analyzer power
button off . Allow for approximately 20 seconds to pass after
shutting down through the application in order to allow the
analyzer to complete its shutdown process before manually
powering off the analyzer .
Logout
To log out, perform the following (see Figure 30) .
1
Tap the
Menu
icon, scroll down, then select
Logout
to log out
of the application .
2
When the
Do you really want to logout? message appears,
select the
checkmark
below the message .
Settings in the application are saved until the device is shut
down .
Utility Asset Data Management
Under the
Data packages
tab, the application displays the
amount of storage that has been used on the bottom left
corner of the screen . When the data storage limits are being
reached, a notification pops up . Refer to
Data Storage for more
information .
