ABB MegaFlex UL S1 Series Скачать руководство пользователя | Manualshive

Страница: 41 / 86

background image

41/86

MegaFlex 1000 to 1600

UPS User Manual / REV-A

Printer screen

The UPS is capable of communicating to a serial
printer, to printout disparate information.
Please be sure to have a serial printer with a
serial RS232 interface.
This is the only printer-interface supported by
the UPS.

Baudrate

This parameter controls the baud rate used for
data transmission.

Parity

This parameter controls the parity used for data transmission.
odd / even / None can be selected.
In case “None” has been set, automatically the parameter “Data bits = 8” is used,
independently of the value of “Data Bits” set.

Data bits

This parameter controls the length of the data word on the serial line during data
transmission.

Stop bit

Parameter not programmable.

Handshake

This parameter is used to determine the communication protocol used when printing.
Valid values are

“XON” standing for the XON/XOFF protocol or “None” standing for any

protocol.

PRINTER
COMMANDS

By using the keys MEASURES / ALARMS / PARAMETERS / ALL it is possible to print selected
data

Note!
Please configure your printer with the following parameters:
115200/None/8/2/None (115200 Bauds/sec, No Parity, 8 Data Bits, 2 Stop bit, No Handshake).

Display screen

Date

You can adjust the date of the real time clock
existing in the UPS by the means of this
parameter (“mm-month, dd-day, yyyy-year”).
The value you enter is thoroughly checked to be
a correct date in the format “MM.DD.YYYY”.

Time

You can adjust the time of the real time clock existing in the UPS by means of this parameter.
The value you enter is thoroughly checked to be a correct time in the format “HH.MM.SS”.
The time is specified in AM/PM format.

Language

This parameter allows the choice of language used to display the information.
Valid choices are: English, German, Italian, Spanish, French, Finnish, Polish, Portuguese,
Czech, Slovenian, Chinese, Swedish, Russian and Dutch.

UPS name

The user can choose the name of the UPS model shown on the main screen (max. 20
characters).

«
...
39
40
41
42
43
...
»

Содержание MegaFlex UL S1 Series























































































Отзывы:

Нет отзывов

Похожие инструкции для MegaFlex UL S1 Series

Бренд: Minuteman Страницы: 14

Бренд: INFOSEC UPS SYSTEM Страницы: 144

Бренд: OPTI-UPS Страницы: 1

Gaming Series GS1100B

Бренд: OPTI-UPS Страницы: 1

Бренд: Belkin Страницы: 2

Бренд: Tycon Power Systems Страницы: 6

Бренд: Tycon Power Systems Страницы: 7

Бренд: Upsen Страницы: 31

Бренд: q-Tech Страницы: 2

Бренд: Eaton Страницы: 138

Бренд: OPTI-UPS Страницы: 30

SPECLINE AVR 700

Бренд: Ever Страницы: 2

Бренд: LEGRAND Страницы: 158

Бренд: LESTAR Страницы: 2

Бренд: Xmart Страницы: 50

Бренд: Eaton Страницы: 16

Бренд: CyberPower Страницы: 2

Бренд: Eaton Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды