2TLC172315M0201 Rev.M3
9
4
Installation
Installation shall be done in accordance with a risk assessment for the individual application.
Installation shall be carried out by authorized personnel and in accordance with instructions
in this document.
Please read and understand Magne and Eden product manuals before starting.
4.1
Installation precautions
Warning!
All safety functions shall be tested before starting up the system.
Warning!
Follow the instructions carefully to avoid personal injury or damage to the
device.
Warning!
Do not defeat, tamper or bypass the safety function. Failure can result in
death or serious injury.
Warning!
The M12 connector shall be connected after Magne has been installed on the
intended surface.
Caution!
It is important that Eva is correctly positioned and oriented in relation to the
integrated Adam sensor in Magne 4. See chapter ‘Positioning and
orientation of Eva with Magne 4’.
Caution!
Magne shall be installed as close to the door handle as possible. The
distance between the lock and the handle creates a lever effect, reducing the
holding force. The bigger the distance, the greater the risk of the anchor
plate not being parallel and aligned with the electromagnet, which
significantly reduces the holding force.
Caution!
Magne 4 shall be connected to the power supply after the door is closed and
when Eva is within sensing distance of Adam.
Caution!
After installation, check the locking function and that the surfaces of the
magnet and the anchor plate are parallel, i.e. that full contact is obtained
when the door is closed. If the anchor plate tilts, the holding force of the lock
can be significantly reduced or eliminated.