ABB IRB 6730, Руководство по эксплуатации продукта

Страница: 542 / 660

Note Action
If needed, run the axis-1 into a position that
gives the required space (space to place
two pallets in a row) at the right-hand side
of the robot, as seen from behind. Jog the robot into position:
• Axis 1: no significance
• Axis 2: -65°
• Axis 3: maximum position in positive
direction, upper arm resting against
the mechanical stop (approximately
+70°)
• Axis 4: 0°
• Axis 5: +90°
• Axis 6: 0°
3
xx2200001811
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the safe-
guarded space.
4
xx1200001331
A Attachment screw to be removed
B Attachment screw not to be removed
If robot is equipped with DressPack:
Unscrew the uppermost attachment screw
that holds the bracket of the DressPack
cable package, and let it "fall down". See
figure!
Note
It is not needed to disconnect the lower
end connectors of the DressPack (as the
figure shows). Connectors are only hidden
to get a better view of which screw to be
removed.
5
Continues on next page
542 Product manual - IRB 6730
3HAC085699-001 Revision: B
© Copyright 2023 ABB. All rights reserved.
5 Repair
5.9.3 Replacing the axis-3 gearbox
Continued